When your sump pump fails, it is advisable to contact a professional to address this problem. Fortunately, there are ways to keep your sump pump working optimally and in great condition thus reducing the number of times a plumber visits your home. Keep your home safe with these few tips.
1. Check the Sump Pit
Obstructions can cause sump failures. It is therefore advisable to check the sump pit periodically. If you find any obstruction that could undermine the efficiency and functionality of your sump pump, get rid of it immediately. Clean any build-up of dirt or sand.
2. Check the Float Switch
Another area to check is the float switch. Your sump pump might begin to malfunction if the level control is tangled in the wiring. A float switch on the pump is expected to move up and down freely. One way to be sure it’s functioning correctly is by filling the sump pit with a garden hose and take note of how the level control swings in the sump pit. There are resources available at Drain Rescue Plumber if you want more information.
3. Determine the State of the Check Valve
You want to make sure that the discharge check valve is working properly; otherwise. it may cause cycling. One way to determine the state of the check valve is to perform a test at the end of the pumping cycle. As soon as the pump stops working, you will notice that trapped water trickles back through the discharge line from the check valve to the pump. You don’t have to panic as it is normal. However, if you discover that the rest of the water in the discharge line travels back into the sump pit, then there’s a problem. Contact a reliable plumber to change the check valve immediately.
Pay close attention to the sound of your sump pump while it’s in operation. If it starts making irritating sounds suddenly, then you likely need to replace the device. While some homeowners might contact a plumber for repair services, it is recommended that you get a new pump and cut down on the money spent on sump pump repairs at this point.
5. Check the Discharge Line
And last but not the least, check the discharge line for build-up of dirt. A clogged discharge line will make it hard for water to pass through it, especially when the pump discharges. Keep in mind that the discharge line location varies from one building to another. As a result, it is important that you know where it is located to make sure that the discharge line is free from obstruction.
During the winter season, the discharge line might freeze due to the harsh weather, and this might eventually become a major problem to contend with. If it stays frozen for an extended period, your basement will become flooded. Some of the major causes of a frozen discharge line are bad location or poor installation. A local plumber with years of experience knows better and can determine the best location for the discharge line. Another way to prevent water from freezing the pipe during the winter season is by installing an ice guard.
If sump pump failure has caused water damage in your home or building, do not hesitate to contact a local plumber.